Modify Abond Group Intf - Planet IP DSLAM IDL-2400 User Manual

5.3.1.4 Modify abond group intf

Description:
Use this command to modify.
Command Syntax:
modify abond group intf ifname <interface-name> [ groupid <groupid-val> ]
[ minaggrrateupstrm <minaggrrateupstrm-val> ] [ minaggrratednstrm
<minaggrratednstrm-val> ] [ diffdelaytolupstrm <diffdelaytolupstrm-val> ]
[ diffdelaytoldnstrm <diffdelaytoldnstrm-val> ] [ asmprotocol Enable | Disable ]
[ sidformat EightBitSid | TwelveBitSid ] [ maxrxbitrateratio
<maxrxbitrateratio-val> ] [ linkhecthrshld <linkhecthrshld-val> ]
[ numoflinksupforgrpup One | All ] [ asmirlthreshold <asmirlthreshold-val> ]
[ maxatmportusrate <maxatmportusrate-val> ] [ enable | disable ]
Parameters:
Name
ifname
<interface-name>
groupid <groupid-val>
minaggrrateupstrm
<minaggrrateupstrm-val>
minaggrratednstrm
<minaggrratednstrm-val>
122
Description
This specifies the interface index used for the ATM Based Multi pair Bonding
type of interfaces. Valid Value is abond-X. Modification and deletion is not
possible if interface is enabled
Type: Create－ Mandatory
Delete --－Mandatory
Modify － Mandatory
Get － Optional
Valid values: 0 - 31
This specifies the group id configured for this interface. This field is
configured statically when the bonded group is provisioned and must not be
changed while the group is in service. These fields may be used by an
operator to help identify mis-configuration or to assist in management or
debugging of the link.
Type: Create － Mandatory
Modify － Optional
Minimum Aggregate Data Rate in bits per second in Upstream direction.
Type: Create － Optional
Modify － Optional
Default value: 0
Minimum Aggregate Data Rate in bits per second in Downstream
direction.
Type: Create － Optional
Modify － Optional
Default value: 0
IDL series User Guide