Table of Contents
Advertisement
icmpcodecmp eq | neq
| any
subruleprio low | high |
asinrule
transporthdr ethernet |
pppoe
Example:
$ create filter subrule icmp ruleid 1 subruleid 2 icmptype 0 icmpcode 0
icmptypecmp neq icmpcodecmp neq subruleprio high
Output:
Verbose Mode On
Entry Created
Rule Id
Icmp type
ICMP type comparison : neq
Subrule Priority
Transport Header
Verbose Mode Off:
Entry Created
424
ICMP code comparison type
Type: Create -- Optional
Modify -- Optional
Default value: any
This specifies the priority of the subrule. Based on
this priority value, the subrule is created in fast or
slow memory. In case priority is specified as 'asinrule', subrule
priority will be same as specified in the
rule.
Type: Create -- Optional
Modify -- Optional
Default value: asinrule
This specifies the type of the transport header in the packet in
which the corresponding IP is being transported. If the value of
this field is ethernet, then the IP is being carried in the ethernet
header. If it is 'pppoe', then the corresponding IP is being carried
in the PPP header.
Type: Create -- Optional
Modify -- Optional
Default value: ethernet
: 1
Subrule Id
: 0
Icmp code
ICMP code comparison : neq
: high
: Ethernet
: 2
: 0
IDL series User Guide
Advertisement
Table of Contents
