Table of Contents
Advertisement
Parameters:
Name
control
<nvram|network>
dataplane
<nvram|network>
config <network|default|
last|backup|clean|minimu
m>
596
Description
This specifies whether the control plane binaries are to be
fetched from the network or the binaries already present in
NVRAM are to be used.
Type : Optional
Default value: Binary present in NVRAM.
This specifies whether the data plane binaries are to be
fetched from the network or the binaries already present in
NVRAM are to be used.
Type: Optional
Default value: Binaries present in NVRAM.
This specifies the boot configuration – the
<last|backup|clean|minimum> source, from which to boot up.
The boot configuration is set to last automatically, whenever
a commit command is given. The boot configuration being an
optional parameter, if it is not specified, it retains the previous
value. So giving reboot after a commit will result in a reboot
from the committed configuration.
Default: Use Default factory configuration while booting up.
Backup: Use the Backup configuration to boot the system.
Last: Use last committed configuration to boot the system.
Minimum: Use a configuration in which:
• the size command is executed.
• the user (login name and password as root) is created.
• an Ethernet interface with IP address 192.168.1.1 mask
255.255.0.0 is created.
Clean: The system comes up with nothing configured.
Network: The system fetches the default configuration file
from the remote host and system comes up with this default
configuration, fd.cfg.
Type : Optional
Default value: If a reboot is being given for the first time,
then the default value is default. Otherwise, the default value
is the same as what was given the last time.
IDL series User Guide
Advertisement
Table of Contents
