Table of Contents
Advertisement
Output Fields:
Field
Interface
LACPDUs Rx
LACPDUs Tx
MarkerPDUs Rx
MarkerPDUs Tx
Marker Response
PDUs Rx
Marker Response
PDUs Tx
Unknown Rx
Illegal Rx
References:
lacp aggr
lacp aggrport list
lacp aggrport info.
5.4.7 Redundancy aggr info Commands
5.4.7.1 Get rdncy aggr info
Description:
Use this command to get.
Command Syntax:
get rdncy aggr info [ifname <interface-name]
148
Description
The Interface name of the Ethernet interface for the aggregator.
The number of valid LACP PDUs received on this Aggregation Port.
The number of LACP PDUs transmitted on this Aggregation Port.
The number of valid Marker PDUs received on this Aggregation Port.
The number of Marker PDUs transmitted on this Aggregation Port.
The number of valid Marker Response PDUs received on this
Aggregation Port.
The number of Marker Response PDUs transmitted on this
Aggregation Port.
The number of frames received, that either carry the Slow Protocols
Ethernet Type value, but contain an unknown PDU, or, are addressed
to the Slow Protocols group MAC Address, but do not carry the Slow
Protocols Ethernet Type.
The number of frames received, that carry the Slow
Protocols Ethernet Type value, but contain a badly
formed PDU or an illegal value of Protocol Subtype.
IDL series User Guide
Advertisement
Table of Contents
