Planet IP DSLAM IDL-2400 User Manual page 340

valtype U8 | U16 | U32
Example:
$ create clfr namedlist info listid 2 valtype u32
Output:
Verbose Mode On
Entry Created
ListId : 2
Value Type : u32
Verbose Mode Off:
Entry Created
Output field:
Field
ListId
Value Type
340
This field specifies the value type of list. Value type
should match value type of matchingenlist nodes in case
a tree attached on same interface as the list. It should be
'U32' in case a rule containing IP subrule or Generic
subrule with cmptype as InGenList or NotInGenList is
attached on same interface. Currently only 'U32' value is
supported.
Type: Create -- Optional
Modify -- Optional
Default value: U32
Description
This field stores the list identifier value.
This field specifies the value type of list. Value
type should match value type of matchingenlist
nodes in case a tree attached on same interface
as the list. It should be 'U32' in case a rule
containing IP subrule or Generic subrule with
cmptype as InGenList or NotInGenList is
attached on same interface. Currently only 'U32'
value is supported.
IDL series User Guide