Table of Contents
Advertisement
Parameter:
Name
tname <tname-val>
descr <descry-val>
enable | disable
treeprio low | high
Example:
$ create clfr tree info tname tree1
Output:
Verbose Mode On
Entry Created
Tree Name
Status
Description
Tree Priority : High
Verbose Mode Off:
Entry Created
IP DSLAM
Description
Name of the classifier tree which is to be included as subrule of this rule.
This classifier tree should exist and be enabled. A classifier tree can be
used only in one subrule. The Maximum length of Name should be 32.
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Default value: -----
A brief description can be given with tree, to identify the tree
Type: Create -- Optional
Modify -- Optional
Default value: 0
A tree cannot be deleted or modified, if it is enabled. A tree can only be
used, if it is enabled. A tree can not be disabled, if it is being used.
Type: Create -- Optional
Modify -- Optional
Default value: 2
Tells the priority of the tree. Based on this priority value, the tree is
created in fast or slow memory.
Type: Create -- Optional
Modify -- Optional
Default value: low
: tree1
: disable
: tree1
359
Advertisement
Table of Contents
