Planet IP DSLAM IDL-2400 User Manual page 310

|q9923IsdnOverlapped
|q9925IsdnNonOverlapped
|q9925IsdnOverlapped
|q9923AnnexMPotsExtUsNonOverlapped
|q9923AnnexMPotsExtUsOverlapped
|q9925AnnexMPotsExtUsNonOverlapped
|q9925AnnexMPotsExtUsOverlapped
shdsltxmode Region1 |Region2
Example:
$ create dsl system dsltype Adsl linecoding Dmt adsltxcfg ansit1413 shdsltxmode
region1 Region2
Output:
Verbose Mode On
Entry Created
DSL Type
Line coding
Adsl Tx Config : ansit1413
Shdsl Tx Mode : region1 Region2
Verbose Mode Off:
Entry Created
Output Fields:
FIELD
DSL Type
Line coding
Adsl Tx Config
Shdsl Tx Mode
310
Annexure Type specifies the regional settings for the
SHDSL line. Only valid for SHDSL.
Type: Create － Optional
Default value: Region1 |Region2
: Adsl
: Dmt
Description
Identifies the firmware to be downloaded.
ADSL line code type.
Transmission capabilities with which the DSL
system is configured. Its default value depends on
the Annex Type supported. Not valid for SHDSL.
Annexure Type specifies the regional settings for
the SHDSL line. Only valid for SHDSL.
IDL series User Guide