Table of Contents
Advertisement
GsRedundantBytesPerRsCode
AturChanPerfAtmCD
AturChanPerfAtmCU
AturChanGsINPup
AturChanGsL0up
AturChanGsM0up
AturChanGsT0up
AturChanGsB0up
References:
ADSL commands
IP DSLAM
equal to 1.
Indicates number of redundant bytes (R) per
Reed-Solomon code in the upstream direction
Provides a count of the total number of cells passed
through the cell delineation and HEC function process
operating on the ATM Data Path while in the SYNC
state.(length = 4 bytes).
Provides a count of the total number of cells in the ATM
Data Path delivered at the interface(s) between ATU-R
and ATM switching layer.(length = 4 bytes).
The actual number of Impulse Noise Protection(INP)
symbols for the upstream interleaved channel. One
symbol equals 250 µs, so an INP of 1 correlates to a
correction time of 250 µs.
The number of bits from the upstream latency path
function #0 included per DMT symbol.(length = 4 bytes). It
is not available for ADSL.
The number of Mux Data Frames per FEC Data Frame in
upstream latency path function #0.(length = 4 bytes). It is
not available for ADSL.
The ratio of the number of Mux Data Frames to the
number of sync octets in the upstream latency path
function #0.(length = 4 bytes). It is not available for ADSL.
The nominal number of octets from frame bearer #0 per
Mux Data Frame at Reference Point A in upstream
latency path function #0.(length = 4 bytes). It is not
available for ADSL.
259
Advertisement
Table of Contents
