System Configuration Save And Restore Commands; Commit; Reboot - Planet IP DSLAM IDL-2400 User Manual

5.25.2 System Configuration Save and Restore Commands

5.25.2.1 Commit

Description:
Use this command to commit the active configuration to the flash. This command is
not supported
Command Syntax:
commit [nbsize]
Parameters:
None
Example:
$ commit
Output:
Set Done
Caution:
This command will take some time to execute.
References:
reboot command
Download command.

5.25.2.2 Reboot

Description:
Use this command to reboot the system and to set the boot configuration.
Command Syntax:
reboot [control <nvram|network>] [dataplane <nvram|network>] [config
<network | default | last | backup | clean | minimum | safe >]
IP DSLAM
595