Planet IP DSLAM IDL-2400 User Manual page 227

Output Fields:
FIELD
IfName
Thresh 15Min Lofs(sec)
Thresh 15Min Loss(sec)
Thresh 15Min Lols(sec)
Thresh 15Min Lprs(sec)
Thresh 15Min Ess(sec)
Thresh Fast Rate Up(bps)
Thresh Intl Rate Up(bps)
Thresh Fast Rate
Down(bps)
Thresh Intl Rate
Down(bps)
IP DSLAM
Description
The ADSL alarm interface name, whose profile is to be modified
or viewed
The number of Loss of Frame Seconds encountered by an ADSL
interface, within any given 15 minutes performance data
collection period, which causes the SNMP agent to send an
'adslAtucPerfLofsThreshTrap'.
The number of Loss of Signal Seconds encountered by an ADSL
interface within any given 15 minute performance data collection
period, which causes the SNMP agent to send an
'adslAtucPerfLossThreshTrap'.
The number of Loss of Link Seconds encountered by an ADSL
interface within any given 15 minute performance data collection
period, which causes the SNMP agent to send an
'adslAtucPerfLolsThreshTrap'.
The number of Loss of Power Seconds encountered by an ADSL
interface within any given 15 minute performance data collection
period, which causes the SNMP agent to send an
'adslAtucPerfLprsThreshTrap'.
The number of Errored Seconds encountered by an ADSL
interface within any given 15 minute performance data collection
period, which causes the SNMP agent to send an
'adslAtucPerfESsThreshTrap'.
Applies to 'Fast' channels only. Configured change in rate
causing an adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate >= ChanPrevTxRate plus the value of this
object.
Applies to 'Interleave' channels only. Configured change in rate
causing an adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate >= ChanPrevTxRate plus the value of this
object.
Applies to 'Fast' channels only. Configured change in rate
causing an adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate <= ChanPrevTxRate minus the value of this
object.
Applies to 'Interleave' channels only. Configured change in rate
causing an adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate <= ChanPrevTxRate minus the value of this
object.
227