Clfr Tree Node Commands; Get Clfr Tree Node - Planet IP DSLAM IDL-2400 User Manual

Parameter:
Name
ifname
<interface-name>
tname <tname-val>
entrypid <entrypid-val>
Example:
$ create clfr tree map Ifname aal5-3 tname tree1 EntryPId 5
Output:
Verbose Mode On
Entry Created
If Name : aal5-3
Tree Name : tree1
Verbose Mode Off:
Entry Created
Output field
Field
If Name
Tree Name
Entry Profile Id

5.13.13 Clfr tree node Commands

5.13.13.1 Get clfr tree node

Description:
Use this command to get.
Command Syntax:
get clfr tree node [tname <tname-val>] [pid <pid-val>] [nodeid <nodeid-val>]
IP DSLAM
Description
Interface name, with which the tree is to be associated
Type: Create -- Mandatory
Delete -- Mandatory
Get -- Mandatory
Type: Create -- Mandatory
Type: Create -- Mandatory
Valid values: 1 - 0xffffffff
Entry Profile Id : 5
Description
Interface name, with which the tree is to be associated
361