Miscelleneous Commands; File Commands; Apply - Planet IP DSLAM IDL-2400 User Manual

5.28 Miscelleneous Commands

5.28.1 File Commands

5.28.1.1 Apply

Description:
Use this command to apply a configuration file stored on the system
Command Syntax:
Apply fname <file-name> [version <version>] [besteffort true|false]
Parameters:
Name
fname <file-name>
version <version>
besteffort true|false
Mode:
Super-User
672
Description
This specifies the name of the configuration file (the
extension of the file shall be .cfg) to be applied. The
file shall contain valid CLI commands. The user shall
specify the filename for files present in the system as
directories. The directories are /nvram/cfg/
factorydef/, /nvram/user/, /sdram/cfg, /sdram/user.
Type: mandatory
Valid values: string of up to 128 characters: ('A'-'Z',
'a'-'z', '0'-'9', '-','_')
This specifies the version of the file that needs to be
applied.
Type: Optional
Default Value: Incase of multiple version files the
active copy gets applied. Not valid for single version
file.
If the besteffort flag is false, command execution (as
specified in "file-name"file) stops immediately after a
command returns an error. If the besteffort flag is
true, command execution (as specified in
"file-name"file) continues even if a command returns
an error.
Type : Optional
Default value : false
IDL series User Guide