Table of Contents
Advertisement
Valtype U8|U16|U32
Example:
$ create clfr list genentry Ifname eoa-1 value 0xAC1901AA valtype u8
Output:
Verbose Mode On
Entry Created
If Name
: eoa-1
Value
Value Type : U32
Verbose Mode Off:
Entry Created
Output field:
Field
If Name
Value
Value Type
IP DSLAM
This field specifies value type of the entry. The value type for all
entries on an interface should be same. Value type should match
value type of matchingenlist nodes in case a tree attached on
same interface. It should be 'U32' in case a rule containing IP
subrule or Generic subrule with cmptype as InGenList or
NotInGenList is attached on same interface. Currently only 'U32'
value is supported.Create -- Optional.
Create -- Optional
: 0xAC1901AA
Description
Name of ethernet, eoa, ipoe or pppoe interface, for which the
classifier generic list is created. Valid values for the field are
between EOA-0 and EOA-23 or between eth-0 and eth-1or
between IPOE-0 and IPOE-191 or between PPPOE-0 and
PPPOE-192.
List Entry Value, of the classifier generic list
This field specifies value type of the entry. The value type for all
entries on an interface should be same. Value type should match
value type of matchingenlist nodes in case a tree attached on
same interface. It should be 'U32' in case a rule containing IP
subrule or Generic subrule with cmptype as InGenList or
NotInGenList is attached on same interface. Currently only 'U32'
value is supported.
335
Advertisement
Table of Contents
