Planet IP DSLAM IDL-2400 User Manual page 365

mplr mplr
valtype
U8|U16|U32|U64|AtmI
f|Aal5Vc|EoaIf|EthIf|D
ir|Prio|Len|vlanid
Sbvarindex
l2start|l3start
Nodeprio
low|high|asintree
Example:
$ get clfr tree node tname tree1 pid 2 nodeid 3
Output:
Tree Name
Profile Id
Exported
Modification Mask : act offset
Action
Value Type
Mask
Value
ValueEnd
Set Base type
Shift Count
Description
IP DSLAM
Type: Modify -- Optional
Valid values: 0 – 31
Default value: ----
Multiplier, is used to multiply the value shifted by ShiftCount. It is
used to calculate the new base offset. This field is valid only if the
gsvClfrTreeNodeAction is SetBase.
Type: Modify -- Optional
Valid values: 1 - 32
Default value: ----
Value type tells the type of value that is to be matched/set.
This specifies the setbase variable index. 'L2Start' is read-only,
containing Layer 2 header start offset. 'L3Start' is read-only,
containing Layer 3 header start offset.
This specifies the priority of the tree node. Based on this priority
value, the tree node is created in fast or slow memory.
: tree1
: 2 Node Id
: true Node Type
: eq
: u32 Offset
: 0x0000000f
: 0x0000000f
: NA
: NA
: NA Multiplier
: Node to match the ip address
: 3
: Binary
: 12
: NA
365