Reset Rmon Mpool; Rmon Queue Info Commands; Get Rmon Queue - Planet IP DSLAM IDL-2400 User Manual

5.22.3.3 Reset rmon mpool

Description:
Use this command to reset some parameters of memory pool. This command will
reset the following parameters of memory pool.
Set MemAllocFailCount value to zero.
Set MemFreeFailCount value to zero.
Set watermark value to the value of the currently allocated memory from that
pool.
Set ThresholdCount value to the zero.
Command Syntax:
reset rmon mpool
Parameters:
None
Example:
$ reset rmon mpool
Output Field:
None

5.22.4 RMON Queue Info Commands

5.22.4.1 Get rmon queue

Description:
Use this command to get the information about a particular queue or about all the
queues present in the system.
Command Syntax:
get rmon queue [rname <queue-name>]
Parameters:
Name
rname <queue-name>
572
Description
This parameter specifies the name of a particular
queue.
Valid values: Any queue name present in the
system.
IDL series User Guide