Table of Contents
Advertisement
tvlanprotocolid
<tvlanprotocolid-val>
tvlanid <tvlanid-val>
abondglbctrlvpi
<abondglbctrlvpi-val>
abondglbctrlvci
<abondglbctrlvci-val>
abondglbsidfmt
EightBitSid |
TwelveBitSid
Example:
$ get nbsize
IP DSLAM
recommended to keep the value for this different from
ProtocolId value defined for 802.1q Vlan(0x8100). This
attribute is applicable only in 'VLAN Stacking mode'.
Type: Modify － Optional
Valid values: 0x8100 - 0xFFFF
This specifies the ProtocolId value to be used for Stacked
Vlan/Service Vlan/Provider Vlan/Second Vlan tag. It is
recommended to keep the value for this different from
ProtocolId value defined for 802.1q Vlan (0x8100). This
attribute is applicable only in 'VLAN Stacking mode'.
Type: Modify － Optional
Valid values: 0x8100 － 0xFFFF
This specifies the ProtocolId value to be used for Stacked
Vlan/Service Vlan/Provider Vlan/Second Vlan tag. It is
recommended to keep the value for this different from
ProtocolId value defined for 802.1q Vlan(0x8100). This
attribute is applicable only in 'VLAN Stacking mode'.
Type: Modify － Optional
Valid values: 0 - 4095
This VPI value will be used for the control channel which will
be created to run the ATM based multi pair bonding
protocol. This is a system wide parameter and applies to all
the abond group interfaces which can be created in the
system. Change in this value will be applied at next boot
only.
Type: Modify － Optional
This VCI value will be used for the control channel which will
be created to run the ATM based multi pair bonding
protocol. This is a system wide parameter and applies to all
the abond group interfaces which can be created in the
system. Change in this value will be applied at next boot
only.
Type: Modify － Optional
This SID Format value will be used for all the Abond Group
Interfaces which can be created in the system. Change in
this value will be applied at next boot only.
Type: Modify － Optional
623
Advertisement
Table of Contents
