Table of Contents
Advertisement
Vlan 2
References:
VLAN commands
5.27.7 VLAN Static Commands
5.27.7.1 Get vlan static
Description:
Use this command to get.
Command Syntax:
get vlan static [vlanname <vlan-name>] [vlanid <vlanid-val>]
5.27.7.2 Create vlan static
Description:
Use this command to create.
Command Syntax:
create vlan static vlanname <vlan-name>vlanid <vlanid-val> [ egressports
<egressports-val> ] [ forbidegressports <forbidegressports-val> ]
[ untaggedports <untaggedports-val> ] [ bridgingmode Restricted | Unrestricted |
Residential | CrossConnect ] [ floodsupport enable | disable ] [ bcastsupport
enable | disable ] [ resvmacprofileid <resvmacprofileid-val> ] [ igmpsnoopaction
Drop | TransparentlyForward | Learn ] [ igmpsnoopproxyreporting Enable |
Disable ] [ igmpsnoopingressprio <igmpsnoopingressprio-val> | none ]
[ darpstatus Enable | Disable ] [ darpfailedhandling Drop | TransparentForward
| FloodTrustedPorts ] [ drabcasttoucast Enable | Disable ] [ bngmac
<bngmac-val> ] [ drastatus Enable | Disable ] [ piastatus Enable | Disable ]
[ findoneportfailact drop | floodtrusted | TransparentlyForward ]
IP DSLAM
This is the second Vlan for the Map entry. In case of
CtoS type of profile this is S-VLAN.
GS_UNREGISTERED_VLANID is a special Virtual Vlan
Id used for keeping configuration of the traffic for those
VLANs that are unknown in the system. The valid range
for this field also includes
GS_UNREGISTERED_VLANID besides the range
1-4097. There can only be single entry for this
parameter corresponding to a given profile.
661
Advertisement
Table of Contents
