Configuration; Vlan - Planet IP DSLAM IDL-2400 User Manual

3.7 Configuration

This section describes how to configure the IP DSLAM by selecting Configuration from
Function List window.

3.7.1 VLAN

Allow user to view and modify VLAN configuration. Double Click on "VLAN" from the
Function List Window. The VLAN configuration window appears as follows.
Field
VLAN ID
VLAN Name
Egress PVC
Untagged PVC
62
Definition
The VLAN id for this VLAN. In devices supporting
"Shared Vlan for multicast" capability, the information for
a multicast mac addr is shared across vlans hence vlan id
is an optional parameter. In devices supporting
"Independent Vlan for multicast" capability each vlan can
have its own information for a multicast mac addr hence
vlanid is a mandatory parameter in all the commands
other than - get. For No Vlan case vlan id is not required.
Name of the VLAN
The set of ports, which are permanently assigned to the
egress list for this VLAN by management.
The set of ports, which should transmit egress packets for
this VLAN, as untagged.
IDL series User Guide