Planet IP DSLAM IDL-2400 User Manual page 203

pktpriority
<pktpriority-val>
Example:
$ modify stp port portid 1 disable pcost 1000 priority 0x10
Output:
Verbose Mode On
Port ID : 1
State : Forwarding
Path Cost : 100
Desig Root:00:30:4F0:10:5A:6C Desig Bridge:00:30:4F:10:5A:6C
Desig Port : 0x8000
STP Status : Enable
Set Done
Port ID : 1
State : Forwarding
Path Cost : 100
Desig Root:00:30:4F:10:5A:6C Desig Bridge:00:30:4F:10:5A:6C
Desig Port : 0x8000
STP Status : Enable
Verbose Mode Off
Set Done
IP DSLAM
significant 6 bits of the more significant octet of the (2 octet long)
Port ID. The least significant 2 bits of the more significant octet
and the less significant octet (total 10 bits) of the Port ID is given
by the value of dot1dStpPort.
Type: Optional
Valid values: 0 -255.
For STP PDUs, this priority shall be used for choice of traffic
class/ Queue on out¦going interface. In case the bridge port is
over an Aggregated ATM VC, this will also be used to identify the
VC, on which the packet is to be sent.
Type: Modify － Optional
Valid values: 0 - 7
Priority
PortStatus : Enable
Desig Cost : 0
Fwd Transitions : 1
Priority
PortStatus : Enable
Desig Cost : 0
Fwd Transitions : 1
STP PacketsPrio : 2
: 0x0
: 0x0
203