Line Rate Configuration - Planet IP DSLAM IDL-2400 User Manual

4.1.4 Line Rate Configuration

This section describes how to configure the transmission rate manually via CLI. Before
configuration, see follows.
1. Input the line rate by using hexadecimal values. Following tables shows the
hexadecimal values that are frequently used.
Hexadecimal 0x1f38300
Decimal 32M
2. Be noted that GsStandard, GsTxPowerAtten and GsAnnexType must be modified
at the same time.
3. Frequently used commands are listed below for your reference:
aturintlmaxtxrate 0x7d000 atucgsannextype adsl2 atucgsstandard adsl2plus
atucgstxpoweratten 0 atucmaxintldelay 1
atucfastmintxrate 0xfa00 aturfastmintxrate 0x7d00 atucgsannextype annexa
atucgsstandard glite atucgstxpoweratten 0 type fastonly atucrateadaptation fixed
Fixed/ Adaptive
ATUC
ATUR Fixed/ Adaptive
IP DSLAM
0x177000 0x109a00
1.5M 1M
RATE type
Interleaved / fast
only
Interleaved / fast
only
0x7d000 0x1f400 0xfa00
512K 128K
Standard Annex type
Adsl2+ / G.dmt / Adsl2 / annex A
G.lite / T1.413
Adsl2+ / G.dmt / Adsl2 / annex A
G.lite / T1.413
0x7d00
64K 32K
81