Table of Contents
Advertisement
Field
DSL Port
VPI
VCI
Learning Status
Sticky Status
Pvid
Accepted Frame Type Used to up/down connection.
Ingress Filter
Priority
a. Choose the port to configure from the DSL Port drop-down list.
b. Configure the Administration status as "Up" or "Down".
c. Choose a Line Profile from the Line Profile Name drop-down list. If to configure a
Line Profile, Click on
d. Choose an Alarm Profile from the Alarm Profile Name drop-down list. If to configure
an Alarm Profile, Click on
If necessary, modify values of specified PVC, including VPI, VCI, Admin Status, Learning
Status, Sticky Status, Pvid, Accepted Frame Type and Ingress Filter, and priority.
e. Click on
f. If to create new PVC, click on
set perimeters via PVC2. after that, click on
68
Definition
Port No. of the IP DSLAM
Virtual Path Identifier
Virtual Channel Identifier
The state of learning on this bridge port. The value enable (1)
indicates that unicast Mac address learning is enabled and the
value disable indicates that unicast Mac address learning is
disabled on this bridge port.
Indicates if the port has been set as sticky. The value enable (1)
indicates that the entries learned on this port will not be aged out.
It also indicates that the entries learned on this port shall not be
learned on any other port. The entries learned on this port can
only be removed by management action or by making the value
as disable (2), so that the entries can be aged out.
Port VID
When this is true, the device will discard incoming frames for
VLANs, which do not include this Port in its Member set. When
false, the port will accept all incoming frames.
Optional Connection priority. No VLAN tag, no priority.
to activate the Line Profile Configuration window.
to activate the Alarm Profile Configuration window.
to submit or click on
and then PVC2 appears and then users can
to close the fmBridgeport window.
to submit your setting.
IDL series User Guide
Advertisement
Table of Contents
