System Version Commands; Get System Version - Planet IP DSLAM IDL-2400 User Manual

Trap parameters
References:
reset traps command
logthresh parameter in modify system and get system commands.

5.25.12 System Version Commands

5.25.12.1 Get system version

Description:
This command is used to get the information of the versions with which the system
has come up.
Command Syntax:
get system version
Parameters:
None
Example:
$ get system version
IP DSLAM
occurred while processing any command issued by the customer.
This specifies additional parameters describing the trap. Different traps have
different combinations of trap parameters. There are also some traps with no
additional parameters. The parameters can be -
Module - <module name>
Cause - <failure cause>
Interface - <interface name>
<user name>
IP - <IP address>
Port - <port number>
VPI - <vpi>
VCI - <vci>
Current - <current value>
Threshold - <threshold value>
Previous - <previous value>
637