Planet IP DSLAM IDL-2400 User Manual page 428

subruleprio low | high |
asinrule
transporthdr ethernet |
pppoe
Example:
$ create filter subrule igmp ruleid 1 subruleid 2 igmptype 0 igmpcode 0 groupaddr
from 224.0.2.3 groupaddrto 224.10.20.30 igmptypecmp eq igmpcodecmp eq
igmpgroupaddrcmp inrange subruleprio high
Output:
Verbose Mode On
Entry Created
Rule Id
Igmp type
Igmp code
Start group address
224.10.20.30
IGMP group address comparison : inrange
Transport Header
Verbose Mode Off:
Entry Created
Output field:
Field
Rule Id
Subrule Id
Igmp type
428
This specifies the priority of the subrule. Based on
this priority value, the subrule is created in fast or
slow memory. In case priority is specified as 'asinrule', subrule
priority will be same as specified in the rule.
Type: Create -- Optional
Modify -- Optional
Default value: asinrule
This specifies the type of the transport header in the packet in
which the corresponding IP is being transported. If the value of
this field is Ethernet(0x1), then the IP is being carried in the
ethernet header. If it is pppoe(0x2), then the corresponding IP is
being carried in the PPP header.
Type: Create -- Optional
Modify -- Optional
Default value: ethernet
: 1
: 0
: 0
: 224.0.2.3
: Ethernet
Description
Unique identifier of a filter rule of which this sub rule is being
created
Unique identifier of a filter subrule
IGMP type
Subrule Id
IGMP type comparison : neq
IGMP code comparison : neq
End group address
Subrule Priority
IDL series User Guide
: 2
:
: high