Table of Contents
Advertisement
Output:
Verbose Mode On
Control Plane Binary : COL 2.6.0.0.040217
Data Plane Binary
Output Fields:
FIELD
Control Plane Binary
Data Plane Binary
5.25.13 Trace Log Configuration Commands
5.25.13.1 Get trace cfg
Description:
Use this command to display the trace configuration for a specific module, or for all
modules.
Command Syntax:
get trace cfg [module <module-name>]
5.25.13.2 Modify trace cfg
Description:
Use this command to modify the trace and log configuration for a specific module
Command Syntax:
modify trace cfg module <module-name> [flow <trace-flow>] [level <trace-level>]
[syslog|net|stdout] [dest <ip-address>] [port <port-number>]
Parameters:
Name
module
<module-name>|all
638
: DP_B02_06_19
Description
This tells about the version of the control plane
binary with which the system has come up.
This tells about the version of the data plane binary
with which the system has come up.
Description
This specifies the module, for which trace/log configuration
is to be modified.
Type
: Modify – Mandatory
Valid values: GCOS,OAM, CIN, GAG, CDB, CLI, ATM,
EOA, TBG, DSLME, NVM, FFC, DNCD, DATAME, GARP,
Get – Optional
IDL series User Guide
Advertisement
Table of Contents
