Planet IP DSLAM IDL-2400 User Manual page 527

Parameters:
Name
portid <portid-val>
vlan <vlan-val>
profileid
<profileid-val>
status enable | disable
vsatag disable |
AddAlways |
AddIfNotExists
configsuboptionbitm
ask aci | PortId | None |
None
IP DSLAM
Description
Bridge Port Identifier
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 1 - 194
VLAN identifier. In case of stacked mode this is virtual
VLAN
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 1 - 4095
PIA profile identifier. This shall be used for this PIA
Instance
Type: Create -- Mandatory
Modify -- Optional
Valid values: 1 - 4
Used to enable or disable PPPOE intermmediate agent for
this instance
Type: Create -- Optional
Modify -- Optional
Default value: disable
This specifies the action to be performed on VSA Tag on
receiving PPPoE discovery packets for this instance. If
disabled PIA will not add VSA tag to the PPPoE packets. If
AddAlways is set then VSA tag is always added. If
AddIfNotExists is set then VSA tag is added only if the
received packet does not contain the VSA tag.
Type: Create -- Optional
Modify -- Optional
Default value: AddAlways
This bitmask is used to indicate which all parameters are
configured for this instance. Parameter bit set in this
bitmask will overwrite the automatically derived values of
agent circuit Id and/or port id by the values configured in
this MO.
Type: Create -- Optional
527