Sntp Cfg Commands; Get Sntp Cfg; Modify Sntp Cfg; Sntp Commands - Planet IP DSLAM IDL-2400 User Manual

5.24 SNTP Commands

5.24.1 SNTP Cfg Commands

5.24.1.1 Get sntp cfg

Description:
Use this command to get.
Command Syntax:
get sntp cfg

5.24.1.2 Modify sntp cfg

Description:
Use this command to modify.
Command Syntax:
modify sntp cfg [enable | disable]
Parameter:
Name
enable|disable
Example:
$ modify sntp cfg enable
Output:
Verbose Mode On/Off
Status : Enable
Output field:
Name
Status
IP DSLAM
Description
This specifies whether the SNTP service is
enabled or disabled. True means that SNTP is
enabled and False means that SNTP is disabled.
Type: Modify － Optional
Valid values: enable, disable
Description
This specifies whether the SNTP service is
enabled or disabled. True means that SNTP is
enabled and False means that SNTP is disab
591