Planet IP DSLAM IDL-2400 User Manual page 372

value <value-val>
valtype U8 | U16 | U32
Example:
$ create filter list genentry ifname eoa-1 value 0xAC1901AA valtype u32
Output:
Verbose Mode On
Entry Created
IfName
Value : 0xAC1901AA
Value Type : u32
Verbose Mode Off:
Entry Created
Output field
Field
IfName
Value
372
PPPOE-191.
Type: Create -- Mandatory
List Entry Value, for the generic filter generic list. This value
must be consistent with the mentioned valuetype of generic list.
Type: Create -- Mandatory
This field specifies value type of the entry. The value type for all
entries on an interface should be same. Value type should
match value type of subrule field for which comparsion type is
ingenlist or notingenlist incase the rule containing the subrule is
attached on the same interface. It should be 'U32' in case a rule
containing IP subrule or Generic subrule with cmptype as
InGenList or NotInGenList is attached on same interface.
Currently only 'U32' value is supported.
Type: Create -- Optional
Default value: U32
: eoa-1
Description
Name of ethernet, eoa, ipoe or pppoe interface, for which the generic filter
generic list is created. Valid values for the field are between EOA-0 and
EOA-23 or between eth-0 and eth-1or between IPOE-0 and IPOE-191 or
between PPPOE-0 and PPPOE-191.
List Entry Value, for the generic filter generic list. This value must be
Delete -- Mandatory
Get -- Optional
Delete -- Mandatory
Get -- Optional
IDL series User Guide