Table of Contents
Advertisement
Output
Verbose Mode On
Entry Created
Profile Name : IGMP
Node Id
Child NodeId : 5
Verbose Mode Off:
Entry Created
Output field:
Field
Profile Name
Node Id
Branch type
Child NodeId
5.13.8 Clfr profile info Commands
5.13.8.1 Get clfr profile info
Description:
Use this command to get.
Command Syntax:
get clfr profile info [pname <pname-val>]
344
: 3
Branch type : true
Description
Name of the classifier profile
Node Id of the node, with which the branch is to be
attached.
This specifies the branch types. For a unary type node,
only onlybr(0xfffffffffffffff9) branch type is allowed. For
binary type and Linear/Non-Linear(Access Deny only)
type, TrueBr(0xfffffffffffffffd) and FalseBr(0xfffffffffffffffe)
are allowed. For ternary type nodes LtBr(0xfffffffffffffffc),
GtBr (0xfffffffffffffffb), EqBr (0xfffffffffffffffa) are allowed.
For Linear, Non-Linear (match in list) the actual value is
allowed. The actual value can be U8, U16, U32, U64,
atmIf, ethernetIf, aal5vc.
Child Node Id
IDL series User Guide
Advertisement
Table of Contents
