Dra Stats Entry Commands; Get Dra Stats Entry; Reset Dra Stats Entry - Planet IP DSLAM IDL-2400 User Manual

L2 type
Encap Type
DRA Add Op82 To
Unicast
References:
DHCP Relay Agent commands

5.20.3 Dra stats entry Commands

5.20.3.1 Get dra stats entry

Description:
Use this command to get.
Command Syntax:
get dra stats entry [portid <portid-val>] [vlan <vlan-val>]

5.20.3.2 Reset dra stats entry

Description:
Use this command to reset.
Command Syntax:
get dra stats entry [portid <portid-val>] [vlan <vlan-val>]
Parameters:
Name
portid <portid-val>
vlan <vlan-val>
IP DSLAM
this instance is created
This Parameter represents the L2 type used
This Parameter specifies the encapsulation type of the aal5 VC
corresponding the bridge port for which this instance is created
This field specifies whether Option 82 is to be added to DHCP
Unicast packets or not. If enabled Option 82 will be added to
DHCP Unicast Packets and when disabled, it will not be added.
Description
Bridge port identifier
Type: Reset -- Mandatory
Get -- Optional
Valid values: 1 - 194
VLAN identifier. In case of stacked mode this is virtual VLAN
Type: Reset -- Mandatory
Get -- Optional
Valid values: 1 - 4095
519