Myconfig.cfg Configuration - Planet IP DSLAM IDL-2400 User Manual

4.1.3.2 myconfig.cfg Configuration

Step Image
1 Enable TFTP server (tftpd32)
$list
2
Name
Acc State
-------------------------------------------------------------------------------
/nvram/bin/bootptftp/
TftpBootp.bin
RO active
/nvram/bin/control/
CP.bin.gz
RW active
/nvram/bin/dataplane/
DP.bin.gz
RW active
/nvram/bin/decompressor/
Decompressor.bin
RO active
/nvram/bin/dslphy/
gsv_dsl_AD_DM_3C00000C.bin.gz1
RW active
/nvram/cfg/factorydef/
FD.cfg
RW active
$download src myconfig.cfg dest /nvram/user/myconfig.cfg ip
3
192.168.100.188
Downloading the File...
....................................
Block 30 erase in progress
........Flash block 30 erase successful...
FLASH program starts at ADDR 3c0000
###############
FLASH program starts at ADDR 3c0000
Download session Completed,Bytes received 18180...
$
$apply fname /nvram/user/myconfig.cfg
4
$create atm vc intf ifname aal5-71 lowif atm-23 vpi 8 vci 82
Entry Created
$create eoa intf ifname eoa-71 lowif aal5-71
:
:
$create atm vc intf ifname aal5-145 lowif atm-47 vpi 8 vci 83
Entry Created
$create eoa intf ifname eoa-145 lowif aal5-145
Entry Created
$create bridge port intf ifname eoa-145 portid 146 learning enable status
enable
Entry Created
$
$commit
5
IP DSLAM
Ver Time
1 Fri Oct 08 09:46:22 2004 111064
1 Fri Oct 08 09:46:22 2004 1293028
1 Fri Oct 08 09:46:22 2004 231572
1 Fri Oct 08 09:46:22 2004 81928
Fri Oct 08 09:46:22 2004 155220
1 Fri Oct 08 09:46:22 2004 18973
Usage
1. Enable TFTP Server
and direct the
myconfig.cfg path for it.
2. List the table and verify
Size
that myconfig.cfg had not
created.
3. Download myconfig.cfg to
NVRAM.
4. 192.168.100.188 is the
PC of TFTP Server..
5. Apply to execute the
commands step by step.
6. If this myconfig.cfg will be
running after
7. It will be disappear after
"reboot config default".
79