Table of Contents
Advertisement
Output:
Aggr IfName
PortList
Port List Interface type : None
Output Fields:
Field
Aggr IfName
PortList
Port List Interface type
5.4.9 Redundancy aggr stats Commands
5.4.9.1 Get rdncy aggr stats
Description:
Use this command to get.
Command Syntax:
get rdncy aggr stats [ifname <interface-name>]
5.4.9.2 Reset rdncy aggr stats
Description:
Use this command to reset.
Command Syntax:
reset rdncy aggr stats ifname <interface-name>
152
: aggr-0
: eth-0 eth-1
Description
Index of the redundancy aggregator, for which layer2
interfaces are associated. Valid Value is aggr-0
The complete list of active layer2 interfaces associated
with the aggregator interface by virtue of redundancy.
Each bit set represents the Ethernet interface, that is
actively associated with redundancy based
aggregation. An interface is actively associated with
aggregator interface, if data for the aggregator interface
can be transmitted/received over it.
It denotes what type of interfaces (Physical ethernet)
are present in Port List. If no interface are present in
port list the value shall be None
IDL series User Guide
Advertisement
Table of Contents
