Planet IP DSLAM IDL-2400 User Manual page 228

Init Fail Trap
OpStateTrapEnable
PowerMgmtTrapEnable
Thresh 15Min Lofs(sec)
Thresh 15Min Loss(sec)
Thresh 15Min Lprs(sec)
Thresh 15Min Ess(sec)
Thresh Fast Rate Up(bps)
Thresh Intl Rate Up(bps)
Thresh Fast Rate
Down(bps)
Thresh Intl Rate
Down(bps)
References:
ADSL Commands
228
Enables and disables the InitFailureTrap. This object is defaulted
disable.
Enables/disables the OpStateChangeTrap
This indicates change in power mangement state
The number of Loss of Frame Seconds encountered by an ADSL
interface within any given 15 minutes performance data collection
period, which causes the SNMP agent to send an
'adslAturPerfLofsThreshTrap'
The number of Loss of Signal Seconds encountered by an ADSL
interface within any given 15 minutes performance data collection
period, which causes the SNMP agent to send an
'adslAturPerfLossThreshTrap'
The number of Loss of Power Seconds encountered by an ADSL
interface within any given 15 minutes performance data collection
period, which causes the SNMP agent to send an
'adslAturPerfLprsThreshTrap'
The number of Errored Seconds encountered by an ADSL
interface within any given 15 minutes performance data collection
period, which causes the SNMP agent to send an
'adslAturPerfESsThreshTrap'
Applies to 'Fast' channels only. Configured change in rate
causing an adslAturRateChangeTrap A trap is produced when:
ChanCurrTxRate > ChanPrevTxRate plus the value of this object.
Applies to 'Interleave' channels only. Configured change in rate
causing an adslAturRateChangeTrap A trap is produced when:
ChanCurrTxRate > ChanPrevTxRate plus the value of this object.
Applies to 'Fast' channels only. Configured change in rate
causing an adslAturRateChangeTrap A trap is produced when:
ChanCurrTxRate < ChanPrevTxRate minus the value of this
object.
Applies to 'Interleave' channels only. Configured change in rate
causing an adslAturRateChangeTrap A trap is produced when:
ChanCurrTxRate < ChanPrevTxRate minus the value of this
object.
IDL series User Guide