Cli Command Brief Description - Planet IP DSLAM IDL-2400 User Manual

Ip dslam
Table of Contents

Advertisement

OAM
PIA
RMON
STP
SNTP
SVL
SVM
Specific Agent
TEA
VC
VLAN

5.1.4 CLI Command Brief Description

CLI Command - Action List
<action>
Description
alias
Used to create an alias for any CLI command.
apply
Used to apply a configuration file stored on the system
climode
Modes of cli/Prio change of CLI task
commit
Used to commit the active configuration to the flash.
Create
Used to create configuration of objects corresponding to the identifier and parameters.
Used to delete configuration of objects corresponding to the identifier and parameters.
delete
If the delete action is confirmed, the configuration of objects will no longer exist.
defragment
Defragment the compact blocks in flash
download
Used to download a binary, configuration or user specific file from theremote host.
get
Used to view information of the selected identifier and parameters.
help
Used to view the detailed usage of CLI commands.
list
Used to list the Configuration or binary files stored on the unit
logout
Used to terminate the CLI.
memset
Specify the length of memory set
Used to set or modify existing configuration of objects corresponding to the identifier
modify
and parameters.
passwd
Used to change the password associated with a user login.
permission
Use this command to change the permission of the files stored on flash
Ping
Used to send one or more ICMP messages to another host for a reply.
prompt
Used to set the new CLI prompt.
rdf
Used to read Flash
rdm
Used to read Memory
reboot
Used to restart the system.
remove
Used to remove a configuration or binary file stored on the unit
reset
Used to reset a port of system.
save
Used to save the configuration to Flash RAM.
Sync
Used to Sync
traceroute
Used to trace the route to the specified destination.
unalias
Used to delete an alias.
upgrade
Used to upgrade a configuration or binary file stored on the system.
Using this command, a user can view the status of entries before and after the
verbose
execution of a command (create, delete, modify, get).
wrm
Used to write Memory
108
Operations Administration and Management
PPPoE Intermediate Agent
Remote Monitoring
Spanning Tree Protocol
Simple Network Time Protocol
Shared VLAN Learning
Shared VLAN for Multicast
Entities that use GenAg interfaces to manage the system
Target Engine Agent
Virtual Channel
Virtual LAN
IDL series User Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Idl-2401Idl-4800Idl-4801

Table of Contents