Planet IP DSLAM IDL-2400 User Manual page 116

Output:
PortId
DefaultPriority
DefaultSVPriority : 1
Output field:
Field
PortId
DefaultPriority
NumTrafficClass
DefaultSVPriority
References:
Bridge port commands
116
: 1
: 1 NumTrafficClass : 3
Description
Port number of the port for which this entry contains bridge
management information.
The default ingress User Priority which can be configured
by the user. The default value of this attribute can be 0 or 0
depending on interface over which the bridge port is
created. The default value is 0 for bridge port created over
ethernet or aggregator interface. And the default value is 0
if the interface over which the bridge port has been created
is one of EOA, PPPoE and IPoE.
The number of egress traffic classes supported on this
port. It depends on whether bridge port is over EOA, in
which case, the max number of queues is value of
maxnumeoaprioQs in gsvSystemSizingGroup and default
value is also value of maxnumeoaprioQs in nbsize or over
Ethernet / aggregated interface, in which case, the max
number of queues is value of MaxNumEthPrioQs in nbsize
and default value is also value of MaxNumEthPrioQs in
nbsize. It is modifiable only when the bridge port is in
disabled state.
Not supported
IDL series User Guide