Table of Contents
Advertisement
Mcastaddr
<mcastaddr-val >
portid <portid>
Example:
$ get igmpsnoop port stats vlanid 6 mcastaddr 00:30:4f:0a:00:01 portid 6
Output:
VLAN Index
Mcast Group Address : 00:30:4f:0a:00:01
Port Index
Query Received
Filter Mode
Include SrcList
Exclude SrcList
Output field
Field
VLAN Index
Mcast Group Address
460
A multicast MAC Address, learned through Igmp Snooping,
within the Vlan (igmpVlanIndex), to uniquely identify the entry,
for which the IgmpSnooping statistics are desired. The range of
accepted values is 00:30:4F:00:00:00 to 00:30:4F:7F:FF:FF
Type: Reset － Optional
Get － Optional
Valid values: 00:30:4F:00:00:00 - 00:30:4F:7F:FF:FF
A Bridge Port belonging to the Vlan (igmpVlanIndex) and Group
(igmpsnoopMcastAddress), for which the IgmpSnooping
statistics are desired.
Type: Reset --Optional
Get –Optional
Valid values: 1 - 386
: 6
: 6
: 100
Report Received : 200
: Include
: 10.12.14.16 12.10.45.76
: 10.12.34.56 34.54.76.87
Description
This parameter specifies the VlanId to uniquely identify the VlanId of the
entry, for which the IgmpSnooping statistics are desired. In devices
supporting "Shared Vlan for multicast" capability, the information for a
multicast MAC address is shared across vlans. Therefore, VlanId is an
optional parameter. In devices supporting "Independent Vlan for
multicast" capability, each vlan can have its own information for a
multicast MAC address. Hence VlanId is a mandatory parameter in all
the commands other than the get command. For no Vlan case, VlanId is
not required.
This parameter specifies a multicast MAC address, learnt through Igmp
Snooping, within the Vlan (igmpVlanIndex), to uniquely identify the
entry, for which the IgmpSnooping statistics are desired. The range of
IDL series User Guide
Advertisement
Table of Contents
