Table of Contents
Advertisement
4.1.3 How to create myconfig.cfg
myconfig.cfg is a txt file that ensures all commands be executed at once.
4.1.3.3 shows the format of myconfig.cfg.
If there are many configurations you would like to execute then you can write all
commands into myconfig.cfg and then execute it at once.
Be note to save ($commit) to IP DSLAM if this would be executed after rebooting.
Required of equipment: TFTP Server (Tftpd32).
4.1.3.1 TFTP Server Configuration
Step
Image
1
2
78
Usage
1. Click "Browse" bottom to indicate current
directory of firmware.
2. Click down-arrow bottom to indicate IP of
DHCP Server.
3. Assign starting address for IP pool.
4. Input subnet mask
5. Save input parameters.
6. Press "Setting" bottom to configure more
details
(option)
7. After assigned this parameter and reboot
Tftpd32 that "Current Directory" at previous
step will follow it.
IDL series User Guide
Advertisement
Table of Contents
