Stp Group Commands; Get Stp Info; Modify Stp Info - Planet IP DSLAM IDL-2400 User Manual

Output:
PortId Join Timer Leave Timer LeaveAll Timer
--------------------------------------------------------------------------------
6
Output Fields:
Field
PortId
Join Timer
Leave Timer
LeaveAll Timer
References:
GVRP Commands

5.6.12 STP Group Commands

5.6.12.1 Get stp info

Description:
Use this command to display the current status of the Spanning Tree Protocol
Group.
Command Syntax:
get stp info

5.6.12.2 Modify stp info

Description:
Use this command to alter the configuration for the spanning tree protocol group.
Command Syntax:
modify stp info [priority <priority-val>] [maxage <maximum-age>] [htime
<hello-time>] [fdelay <forward-delay>] [enable|disable]
198
30 90
Description
Index of the Bridge Port.
The GARP Join time, in centiseconds. Join time value should be
less than half the Leave time value.
The GARP Leave time, in centiseconds. Leave time value
should be greater than 2 times Join time value.
The GARP LeaveAll time, in centiseconds. LeaveAll time value
should be large (more than 15 times) relative to Leave time
value.
5000
IDL series User Guide