4.1.2.1 Contents of FD.cfg
Use WordPad or Word to open FD.cfg. (See the following figure)
The default configuration in FD.cfg summarized as follows.
Default IP: 192.168.100.111
SNTP: disable
RFC-1483 Bridge mode only
One PVC (8/81) for each ADSL port
Bridge port numbering 1 to 48 mapping to PVC 8/81 for ADSL port1 to port 48/24
VLAN feature Disable
Eth0 enable (for uplink), its bridge port number is 385
Eth1 disable (for downlink)
MGMT interface disable
Note:
To view the detailed contents, please refer to the Appendix A.
IP DSLAM
73