Planet IP DSLAM IDL-2400 User Manual page 258

Example:
$ get adsl atur channel ifname dsli-0
Output:
Ifname
Interleave Delay(ms) : 10
Prev Tx Rate(bps)
Gs Curr Atm Status
GsRsDepth
AturChanPerfAtmCD
AturChanGsINPup
AturChanGsM0up
AturChanGsB0up
Output Fields:
FIELD
Ifname
Interleave Delay(ms)
Curr Tx Rate(bps)
Prev Tx Rate(bps)
Crc Block Length(byte)
Gs Curr Atm Status
GsSymbolsPerRsWord
GsRsDepth
258
: dslf-0
Curr Tx Rate(bps)
: 10 Crc Block Length(byte)
: 1 GsSymbolsPerRsWord
: 10 GsRedundantBytesPerRsCode : 10
: 10 AturChanPerfAtmCU
: 10 AturChanGsL0up
: 10 AturChanGsT0up
: 10
Description
The ADSL Interface Name
Interleave delay for this channel. Interleave delay
applies only to the interleave channel and defines the
mapping (relative spacing) between subsequent input
bytes at the interleaver input and their placement in the bit
stream at the interleaver output. Larger numbers provide
greater separation between consecutive input bytes in the
output bit stream, allowing for improved impulse noise
immunity at the expense of payload latency.
Actual transmit rate on this channel
The rate at the time of the last adslAturRateChangeTrap
event.
Indicates the length of the channel data-block on which
the CRC operates.
Indicates an ncd or lcd failure if the counter surpasses
127. If neither ATM counter surpasses 127, the return
value will be NoAtmDefect.
Indicates number of DMT symbols per Reed- Solomon
code word (S) in the upstream direction Note that S is not
restricted to interleaved mode only. Even in fast mode, S
is a valid constant value and is equal to 1.
Indicates interleaving depth (D) in the upstream direction
Note that D is not restricted to interleaved mode only.
Even in fast mode, D is a valid constant value and is
: 10
: 10
: 10
: 10
: 10
: 10
IDL series User Guide