Planet IP DSLAM IDL-2400 User Manual page 510

enable | disable
pktpriority
<pktpriority-val>
Example:
$ create pppr intf ifname pppr-0 lowif aal5-0 maxPdu 1484 ppprAckTO 10
lowifToggleTimerTO 10 nature dynamic configstatus Normal
Output:
Verbose Mode On
Entry Created
Ifname
Max PDU Size
Lowif Toggle TimeOut : 10
Nature
Operational Status
PPPOA PacketsPrio:2
Verbose Mode Off:
Entry Created
510
Modify － Optional
Default value: Normal
Administrative status of the interface
Type: Optional
Valid values: enable or disable
Default Value: enable
Priority to be set in tagged PPPOE frames or
PPP packets sent over this port from Control
Plane .This priority shall also be used for choice of
traffic class/ Queue on outgoing interface whether
the frame is tagged or not.In case the bridge port is
over an Aggregated ATM VC, this will also be
used to identify the VC, on which the packet is to
be sent.
Type: Create － Optional
Modify － Optional
Valid values: 0 – 7
Default value: 0
: pppr-0 Low IfName
: 1484 Ter Ack TimeOut : 10
: dynamic Config Status
: up Admin Status
: aal5-0
: Normal
: up
IDL series User Guide