Atm Oam Cc Commands; Get Oam Cc Vc; Modify Oam Cc Vc - Planet IP DSLAM IDL-2400 User Manual

CRC Errors count
Oversized SDU
References:
atm vc related commands
atm port and statistics related commands
atm vc statistics commands.

5.5.2 ATM OAM CC Commands

5.5.2.1 Get oam cc vc

Description:
Use this command to get.
Command Syntax:
get oam cc vc [ifname <interface-name>]

5.5.2.2 Modify oam cc vc

Description:
Use this command to modify.
Command Syntax:
modify oam cc vc ifname <interface-name> [action act | deact] [dir sink | src |
both] [mode auto | manual]
Parameters:
Name
ifname
<interface-name>
action act | deact
dir sink | src | both
IP DSLAM
This specifies the number of CRC errors encountered.
This specifies the number of oversized SDUs received.
Description
This parameter specifies the interface, for which information is desired.
In case the field is not specified, then the information for all valid
interfaces should be displayed.
Type: Modify -- Mandatory
Get -- Optional
This field specifies the CC action to be taken. This is used along with
CC direction field.
Type: Modify -- Optional
This field specifies the direction for CC
activation/Deactivation.Direction could be source (src), sink or both.
155