Sntp Servaddr Commands; Get Sntp Servaddr; Create Sntp Servaddr - Planet IP DSLAM IDL-2400 User Manual

5.24.2 SNTP servaddr Commands

5.24.2.1 Get sntp servaddr

Description:
Use this command to get.
Command Syntax:
get sntp servaddr

5.24.2.2 Create sntp servaddr

Description:
Use this command to create.
Command Syntax:
create sntp servaddr <ip-address>
Example:
$ create sntp servaddr 172.23.3.45
Output:
Verbose Mode On
Verbose Mode On
Entry Created
Server Addr : 172.23.3.45
Verbose Mode Off
Entry Created
Output field:
Field
Server Addr
Status
592
Status : Standby
Description
This specifies the IP Address of the SNTP
Server.
Server is in Use. OR Server is in standby mode
i.e. not in use.
IDL series User Guide