Starting Idl Manager - Planet IP DSLAM IDL-2400 User Manual

2.3.3 Starting IDL Manager

Perform basic communication functions through IDL Manager, procedures as follows:
1. Users can activate the IDL Manager either from Program manager or clicking the
shortcut icon on the desktop as below.
2. Before starting to IDL Manager, it is necessary that your PC's IP and IP DSLAM's IP
are in the same subnet.
Note:
Default IP address of Management port is 192.168.200.111.
3. To enable SNMP for accessing, one needs to issue commands below to IDL series by
Telnet to management port or connecting to console port (9600, N, 8,1) and then log in
with default username and password that both are "admin".
a. "$create snmp comm community public rw".
b. "$create snmp host ip 192.168.200. xxx community public", where 192.168.200.xxx
is the IP of your PC.
c. "$create snmp traphost ip 192.168.200.xxx community public version v1", where
192.168.200.xxx is the IP of your PC.
4. Launch the IDL Manager and then log in with the user name and password.
Click on "OK" to enter the IDL Manager system.
Note:
Default Username is "Supervisor" and password is blank.
5. After launching IDL Manager and logging in, the main window appears as below.
IP DSLAM
37