Planet IP DSLAM IDL-2400 User Manual page 324

Output:
Verbose Mode On
Entry Created
Interface
Type
IP Address
Pkt Type
Orl(mbps)
Configured Duplex
Configured Speed
Profile Name
Mgmt VLAN Index
Mgmt S-VLAN Index
Mgmt T-VLAN Index
Tagged Mgmt PDU Prio: 2
trfclassprofileid
Ctl Pkts Instance Id:1
Speed
Operational Status : Down
Verbose Mode Off:
Entry Created
Output field:
Field
If-Name
Type
UseDhcp
324
: eth-0
: Uplink
: 192.168.1.1
: Mcast
: 100
: Auto
: Auto
: SPPROFILE
: 2
: 2
: 2
: 1
Ctl Pkts Group Id : 1
: -
Description
This parameter specifies the interface index used for the
Ethernet type of interfaces. Valid Values starts from eth-0
and continues to eth-*
This parameter specifies the type of the Ethernet interfaces.
The Net is towards the NET side (2 at most) and slave
means the physical interface connected to the slave device.
This parameter specifies whether a DHCP client is to be
triggered to obtain an IP address for this interface. If this is
configured as GS_FALSE and 'etherIfIpAddress' is not
configured, then management IP traffic will not flow through
the interface. If an IP address is configured and 'modify' is
done for this field, then 'tEtherIfIpAddress' and
'tAggrIfNetMask' fields shall be set to Zero (0.0.0.0). Both
Usedhcp and 'tEtherIfIpAddress' shall not be specified
UseDhcp : False
Mask : 255.255.0.0
Duplex : None
Admin Status : Up
IDL series User Guide