Table of Contents
Advertisement
applywhenreq enable
|disable
pkttype Mcast | Bcast
|Ucast
snooplevel interface
|bridge
exprid <exprid-val>
Example:
$ create filter rule entry ruleid 1 action setprio description lacp priority 7 status
enable statsstatus disable ruleprio high ruledir in applywhenreq disable pkttype
Ucast snooplevel interface exprid exprid 1 actionval 0x00000000 actionmask
0xffffffff
386
This specifies whether this rule is to be applied only when required.
Rule description field is mandatory if this field is set to value 'enable'.
This field can be modified only if 'status' has the value 'disable'. This
field is ignored if the 'ruleAction' has value 'clfrdef'.
Type: Create － Optional
Modify － Optional
Default value: disable
This field specifies the types of packets on which this rule is to be
applied. 'Mcast' means this rule is valid for multicast packets, 'Bcast'
means this rule is valid for broadcast packets and 'Ucast' means this
rule is valid for unicast packets. This field is valid only if 'ruleDir' is
'out'. This field can be modified only if 'status' has the value 'disable'.
Type: Create － Optional
Modify － Optional
Default value: Ucast
Snoop level specifies whether packet will be snooped directly from
Interface or from Bridge after applying Bridging functionality .If none
of the Rule actions is 'sendtoControl' or 'copytocontrol', then this field
has no significance. This field can be modified only if 'status' has the
value 'disable'. Type: Create － Optional
Modify － Optional
Default value: interface
Identifies the expression id from the Generic Filter Expression Table
to be used. This field is used only if 'ruleAction' is 'exprdef'. In
absence of this field, the default relationship between all subrules is
all ANDed.
Type: Create － Optional
Modify － Optional
Valid values: 1 - 65535
Default value: 0
IDL series User Guide
Advertisement
Table of Contents
