Table of Contents
Advertisement
OutTraps
AuthenTraps
SilentDrops
ProxyDrops
References:
SNMP commands.
5.23.4 SNMP Traphost Commands
5.23.4.1 Get snmp traphost
Description:
Use this command to get.
Command Syntax:
get snmp traphost [ip <ip-address>] [port <port-val >]
5.23.4.2 Create snmp traphost
Description:
Use this command to create.
Command Syntax:
create snmp traphost ip <ip-address > community <community-val > [port
<port-val >] [version v1 | v2c]
588
The total number of SNMP Trap PDUs which have been generated by the
SNMP protocol entity.
Indicates whether the SNMP agent process is permitted to generate
authentication-failure traps. The value of this object overrides any configuration
infor-mation; as such, it provides a means whereby all au-thentication-failure
traps may be disabled.
The total number of GetRequest-PDUs, GetNextRequest-PDUs,
GetBulkRequest-PDUs, SetRe-quest-PDUs, and InformRequest-PDUs
delivered to the SNMP entity which were silently dropped be-cause the size of a
reply containing an alternate Re-sponse-PDU with an empty variable-bindings
field, was greater than, either a local constraint, or the maximum message size
associated with the origi-nator of the request.
The total number of GetRequest-PDUs, GetNex-tRequest-PDUs,
GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs
delivered to the SNMP entity, which were silently dropped, be-cause the
transmission of the (possibly translated) message to a proxy target failed in a
manner (other than a time-out) such that no Response-PDU could be returned.
IDL series User Guide
Advertisement
Table of Contents
