System Traps Commands; Reset Traps; System Traps Log Table Commands; Get Traps - Planet IP DSLAM IDL-2400 User Manual

5.25.10 System Traps Commands

5.25.10.1 Reset traps

Description:
Use this command to delete all trap logs.
Command Syntax:
reset traps
Mode :
super-user
Example:
$ reset traps
Output:
Set Done
Output Fields:
None
References:
get traps command.

5.25.11 System Traps Log Table Commands

5.25.11.1 Get traps

Description:
Use this command to get the listing of all Trap Log Table entries (tTraps) or the last
few tentries (Traps). This command is not supported on a flashless system.
Command Syntax:
get traps [num-of-traps]
IP DSLAM
629