Table of Contents
Advertisement
5.24.3 SNTP Stats Commands
5.24.3.1 Get sntp stats
Description:
Use this command to get.
Command Syntax:
get sntp stats
5.24.3.2 Reset sntp stats
Description:
Use this command to reset.
Command Syntax:
reset sntp stats
Example:
$ get sntp stats
Output:
Verbose Mode On/Off
Requests count
Invalid Response count : 0
Last Time Stamp [MM/DD/YYYY::HH:MM:SS] : Thu Jan 01 00:00:00 1970
Output field:
Field
Requests count
Responses count
Invalid Responses
count
Lost Responses count
Last Time Stamp
[MM/DD/
YYYY::HH:MM:SS]
IP DSLAM
: 0
Response count
Lost Response count : 0
Description
This specifies the number of requests sent to SNTP
Server.
This specifies the Number of responses received from SNTP Server.
This specifies the Number of invalid responses received from SNTP
Server.
This specifies the number of responses which do not come within
time limit.
This specifies time at which the local clock was last set or corrected.
The display format shall be mm/dd/ yyyy:hr:min:sec.
: 0
593
Advertisement
Table of Contents
