Planet IP DSLAM IDL-2400 User Manual page 529

insertiwfsubop enable
| disable
portno <portno-val>
Example:
$ create pia instance entry portid 1 vlan 1 profileid 1 status enable vsatag
AddAlways configsuboptionbitmask aci acival "[ANI] atm 3/10:100.33î (slot = 3,
port = 10, vpi = 100, vci = 33)" raival "conexant noida" syncratefields
ActualDelaydnstrm iwftagfromclientact drop insertiwfsubop enable portno 10
Auto Output
Output:
Verbose Mode On
Entry Created
Port Id
Profile Id
PIAVsaOption
Config Sub Options Bitmask : aci
Agent Circuit Id
Remote Agent Id
SyncRateInfoField Bitmask : ActualDelaydnstrm
Act for IWFTag From Client : drop
Insert Iwf Subop
Port No
VCI
L2 type
Encap Type
Verbose Mode Off:
Entry Created
IP DSLAM
This is used to indicate whether to add IWF suboption to
Columbia originated PPPoE discovery packets received for
this instance. This field is valid only for PPPOAE interface.
Type: Create -- Optional
Modify -- Optional
Default value: enable
This field specifies Atm Port number.Its value is considered
only when the bitmask for portid is set in
ConfigSubOptionBitmask
Type: Create -- Optional
Modify -- Optional
Default value: \0
: 1 VLAN
: 1 PIA status : enable
: AddAlways
: "[ANI] atm 3/10:100.33î (slot = 3, port = 10, vpi = 100, vci = 33)"
: "conexant noida"
: enable
: 10
: 33 VPI
: Eth
: Llcmux
: 1
: 100
529