Planet IP DSLAM IDL-2400 User Manual page 353

Output:
Verbose Mode On
Entry Created
Profile Name
Node Id
Exported
Modification Mask : Act
Action
Value Type
Mask
Value
Value End
Set Base type
Shift Count
Description
Verbose Mode Off:
Entry Created
Output field:
Field
Profile Name
Node Id
Exported
Node Type
Modification Mask
Action
Value Type
Offset
IP DSLAM
: IGMP
: 3
: true
: eq
: u16
: 0xffff
: 0x800
: None
: none
: none
: Node to match the ip address
Description
Name of the classifier profile
Node Id, should be unique within a profile
This specifies what fields of an exported node are modifiable
and can be modified while the profile is part of a classifier tree.
This specifies the type of the Classifier node
This specifies what fields of this nodes can be modified, if this
node is an exported node.
Action tells what is to be done by a node.
Value type tells the type of value, which is to be matched/set.
For leaf type nodes this field is not valid. if ActVal is SetBase and
SBaseType is Compute then this value is used to specify the
value type (U8, U16, U32), which shall be used to compute the
new base offset. This field is not valid for other values of
SBaseType.
OffSet, in the packet with respect to the base offset, from where
we have to take the value, which is to be matched. If ActVal is
SetBase and SBaseType is Compute then this value is used to
specify the offset with respect to the base offset, which shall be
used to specify the field of the packet used to compute the new
Node Type
Offset
Multiplier : none
: Binary
: 12
353